Monthly Archives: October 2016

Just Call Me a Sewing Machine Mechanic

Music to my ears, the purr of my old sewing machine.  My old White/Universal metal baby was purring no more though.  Locked up solid, she has been living in my closet for the last year.

20161018_234710Made of all metal shafts and gears, I had bought my old Model 4400 in 1984.  It was my first machine, and over the years it had made pillows, curtains, purses, pouches, costumes, aprons, even clothing back when I wasn’t so “curvy”.  Computerized machines with a zillion fancy stitches  are nice and all, but I never use much more than straight and zigzag stitches anyway, and the computerized models just won’t do just plain old straight sewing well, through any kind of thickness, and the stuff I make tends to have thickness or heavy seams.  Beep, beep, beep. Fist pounding.  Curse.

20161018_234741If you have an old machine sitting around, they aren’t that hard to figure out.  Metal parts need lubrication, and eventually parts can just freeze in place.  I’m not the most mechanical person, but I had hoped if I could find the spot that was locked up, I could point someone who is mechanical in that direction to fix it.  And besides, it was not working anyway, it’s not like I was going to hurt it.  So I took off the top and side covers of the machine, removed the hand wheel and just watched what happened when I pressed the foot pedal.  Nothing happened.  The motor whirred, but nothing moved — at all.

20161018_234751So I started with the belts and flywheels near the motors — or are they pulleys?  I don’t know, they’re round and weren’t spinning.  Thingamabobbers.  Whosie whatsits.  I tried to turn each of the two flywheels by hand, and found the culprit.  The bigger of the two wheels, the one on the left, wouldn’t budge.  I braved a pair of pliers, grabbed the wheel and gently twisted.  It broke free pretty easily.  Once free, and after a good oiling, it was spinning like a top.  I oiled the rest of the drive shaft and gears because everything had gotten pretty tight, even with standard oiling over the years.  My biggest snaffu was the research required on how to put the hand wheel back on properly.  I finally figured out there was a washer that I didn’t notice had fallen off the hand wheel cap, which as it turns out is a really integral part of the whole thing.  Not only is it integral, it has a top and a bottom and has to be installed correctly oriented.

My old machine has a new life, and has started to purr again.

There wasn’t a lot of instructional videos on YouTube that talk about these 1970s/1980s metal machines.  Either you were repairing the antique Singer machines, or you were troubleshooting a new, computerized machine.  I highly recommend the New Mexico State University College of Agricultural, Consumer and Environmental Sciences Sewing Machine Maintenance Guide, for some basic info on how these simple 1970s style machines work — and to point out there’s a washer laying around somewhere you just might need, and that little mark on the washer means “top”.

Now to figure out tensioning.  And to get my nails re-done.  Turns out sewing machine oil dissolves gel polish.

The Essentials Only Cross Body Pouch

BagCombo.jpg

I carry a cross body bag daily, but like most purses, it tends to gather what feels like rocks.  I don’t know why, but it’s always overflowing with just stuff, most of which I don’t need to lug around all the time. If I have a lot of walking to do, I prefer to be hands-free and to carry just the necessities — phone, credit card wallet and coin pouch.  To that end, I created my own smartphone cross body pouch — designed to hold just the essentials when I’m out running around from the grocery store, to garage-saling, or to a craft fair.

This pouch is tall enough, and more than wide enough, to fit my Samsung Note 4, one of the biggest smartphones out there.  Lined with no visible seams, this bag is simple to customize.  Experiment with by combining different fabric colors and patterns between the three main outside pieces, different closures, and different straps, all in the same pouch.

You’ll need:

  • Outer fabric
  • Coordinating Lining fabric
  • Coordinating zipper, at least 8″ long (we’ll cut this down)
  • Fusible Fleece
  • KamSnap, button, Velcro or some other closure for the flap.
  • Two small swivel hooks.
  • Download the  essentials-only-cross-body-pouch-pattern. All pieces are on one sheet.  Print three copies at 100%, and cut out the pieces A through D.

Piece A – the back and flap.
Cut 1 outer
Cut 1 lining
Cut 1 fusible fleece

Piece B – upper front.
Cut 1 outer
Cut 1 lining
Cut 1 fusible fleece

Piece C  – lower front.
Cut 1 outer
Cut 1 lining
Cut 1 fusible fleece

Piece D  –  Pieces B and C, for pocket lining.

Cut 1 lining

For the strap tabs, cut two rectangular pieces 2″ x 3″ each.

  1. Cut Outer and Lining fabrics, and fusible fleece, as noted above.
    cutfabric
  2. Prepare the tabs. Fold tab in half lengthwise and press.  Fold the edges inside, press again.  Resulting  strip will be 1/2″ wide.  Topstitch to close.  Set aside.
    20161010_125201
  3. Iron fusible fleece to the outside pieces A, B and C.
  4. Attach zipper to front pieces, B and C.  Lay the Lining piece B down, right side up.  Lay zipper, face up, on top edge, aligning edges.  Lay the Outer piece B on top, right side down, aligning all, creating a “zipper sandwich”.  Stitch.
    20161010_132500a.  Fold back the outer and lining fabrics so they are both right side out, and press, exposing the unsewn edge of the zipper.

    20161010_134244.jpg

    b.  Repeat step 4.a. for the other half of the front, piece C.  Take care to sew the straight edge of the fabric to the zipper, not the curved corner side.

    20161010_134612.jpg

    In this step, be sure to match patterns better than I did.  I realized when I got done, I’d put the top portion of the pocket on upside down, so the chevron pattern didn’t match properly.  But, I kind of liked the look and opted to leave it alone.

    c.  Fold back the outer and lining so they are both right side out, and press.  Topstitch along the edge of the zipper teeth on both sides.

    20161010_135141.jpg

    d.  If you’re using Velcro as a closure, now is the time to sew a rectangle of Velcro down in the center of the top portion of the pocket.  If you’re using a KamSnap or button, skip this step.

  5. Lay pocket lining D wrong side up on front zipper panel, also right side up.  Trim the pocket lining at the straight edge if it’s too long.  Stitch.  Turn under and press.  Topstitch.
    20161010_140521.jpg

    20161010_140655.jpg

    20161010_141010.jpg

    20161010_141121.jpg

  6. Open zipper halfway and baste pocket lining to pocket front to hold in place while finishing.  Double stitch over the zipper to secure.  Snip the excess zipper on both sides.
    20161010_144427.jpg
  7. Lay fold one tab from step 1 in half, and lay with loop toward the center on the front of the pocket piece.  Baste in place.  repeat on other side.  Trim ends.
    20161010_145102.jpg
  8. If you’re using Velcro, now is the time to stitch a rectangle to the top center of Piece A Lining. If you’re using a KamSnap or button, skip this step.
  9. Lay piece A, Outer Back down, right side up. Lay finished pocket on top of back, right side down.  You can baste stitch the pocket to the back at this point if you want, but you don’t have to.  Lay piece A, Lining Back face down on top of all.  Pin or clip in place.  Stitch around the entire outside edge, leaving a 2″ or so opening in one side of the flap so you can turn the entire piece when done.  Trim seams, clip curves.
    (A cute customization idea, during this step try sewing a simple loop in at the center of the top of the Back flap, when you can then attach to a button sewn to the front pocket of the pouch as the flap closure.)

    20161010_145204.jpg

    20161010_150107.jpg

    20161010_151559

  10. Turn the pouch right side out through the opening left in the flap.  Turning is tedious, and there’s some bulk that will have to go through the hole you left.  Once turned, press the entire pouch flat, turn the raw edges of the hole you left to the inside and press flat.  Whip stitch closed.
    20161010_153146.jpg

    (Optionally, if the fabric is not too thick, topstitch around the entire perimeter of the pouch and flap, including closing the opening.  If you choose to topstitch, don’t topstitch over the zipper.  Topstitching is usually a nice finish, but in this case I think it makes the whole pouch appear kind of flat, a look I didn’t care for after I did it.)
  11. If using a button, add a buttonhole to the completed flap now. Sew down a button to the top of the front pocket.  If using a KamSnap, apply it now similarly positioned.  I used a KamSnap on this pouch.  If you used a loop closure, sew your button down to the top of the front pocket now.
  12. Create a strap using complimentary fabric. A good length for the strap when used by an adult, is 50″. There are lots of options to attach the strap.
    – Try sewing a small D-ring into the loop to attach a swivel hook to when adding the strap tabs to the purse in step 7 above — or leave the loop plain.
    – Try leaving the loop plain and slipping the end of a rope or very narrow sewn strap through the loops, then tie a knot in the end right under the loop, and tack the knot down to the bag for a “rustic” look.
    – For this purse, I opted for a narrow strap and swivel hook attaching directly to the loop.
    20161010_192504

Have fun experimenting with different scraps of fabric, different patterns and colors, and making a patchwork style pouch.  If you’re into machine embroidery, the back is more than suitable for an embroidered monogram, as is the lower part of the front pocket. Change up the shape of the flap.  These would make great gifts for anyone — I can envision shortening the strap for a teenager and using their school colors.

Thanks for trying out my very first tutorial and if I can answer any questions, leave me a message.

Milady